Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Ontario
Furnace repair in Ontario, CA typically costs $150 – $700, and most jobs are completed the same day we arrive. If your furnace is short-cycling near the Ontario Mills area or blowing cold air through a 1960s ranch off Euclid Avenue, we can usually have a background-checked technician at your door within hours. Call (707) 340-6380 and a live person answers, day or night.

We know Ontario furnaces differently than an out-of-town shop would. The dust that rolls off the 10 and 15 freeway interchange settles into blower wheels, coats heat exchangers, and quietly chokes airflow. That means the repair that actually fixes your furnace here often isn’t a part swap at all, it’s restoring proper airflow through a system that’s been breathing fine dust for a decade. Our Furnace Repair team sees this pattern weekly across Ontario, and we plan for it before we pull into your driveway.
Why Meadowsweet Heating and Air Riverside Is Ontario’s Preferred Furnace Repair Company
Luis Serrano leads our crews with a simple rule: treat every Ontario home like a family lives there, because one always does. Our technicians are background-checked, uniformed, and trained to follow the C.A.R.E. values on every visit. Clean up like it’s their own home. Ask before moving anything. Respect the family’s time and quiet hours. Explain the price before the work. In a city where trust matters more than a flashy truck wrap, that approach shows up on the floors we protect and the written price we hand you before anything gets touched.
We respond to Ontario calls from our Inland Empire office, which means no long dispatch delays from across the county. Whether you’re in a 1950s ranch near Chaffey High or a newer two-story off the 60, you’ll get a straight answer about what’s wrong, what it costs, and when we’ll be there. Every job includes shoe covers, drop cloths, and a photo of the clean-up before we leave. And it’s all backed by the 365-Day Done Right Promise. If it’s not done right, we make it right.
Ontario homeowners call us because the phone rings and a person picks up. Not a queue, not a voicemail tree. A live human, 24 hours a day, every day of the year. When your furnace dies on a December night and the Santa Anas are howling, that matters.
Styles & brands we work with







Furnace Tune Up in Ontario
A Furnace Tune Up in Ontario runs $80 – $200 and is the single best thing you can do before winter, not just to prevent breakdowns but to undo what the freeway dust has been doing to your system all year. In this part of the Inland Empire, a tune-up isn’t a formality. It’s the difference between a furnace that limps through January and one that holds 70 degrees without struggling. We clean burners, test the flame sensor, check static pressure, and clear the blower wheel of the fine particulate that Ontario’s truck and rail corridors push into every vent.
Static Pressure and Airflow Testing
Most Ontario furnaces from the 1950s through 1970s were paired with ductwork that was undersized even when it was new. Add forty years of dust accumulation along the 10/15 corridor and the static pressure climbs until the furnace overheats and trips its limit switch. During a tune-up, we measure actual static pressure against manufacturer spec. When it’s high, we show you the number and explain what it means before recommending a fix.
Heat Exchanger Inspection
A cracked heat exchanger is the one furnace problem you never want to ignore, and Ontario’s fine dust accelerates the corrosion that causes it. Our tune-up includes a visual inspection of the heat exchanger for cracks, rust, or burn-through. If we find something concerning, we show you photos from the inspection camera and explain your options honestly. No scare tactics, just straight information.
Emergency Furnace Repair in Ontario
Emergency Furnace Repair in Ontario means a furnace that won’t run on a 38-degree night, and you need someone now. We answer the phone 24 hours a day, and we dispatch to Ontario’s neighborhoods including the areas near Ontario International Airport, the C Street corridor, and the newer developments north of the 210. A standard emergency repair falls in the same $150 – $700 range as any other furnace repair in Ontario. You’ll get your written price before work begins, even at 2 a.m.
No-Heat Calls on Cold Inland Nights
When the temperature drops into the 30s and your furnace won’t ignite, the problem is usually a failed ignitor, a dirty flame sensor, or a gas valve that’s stopped opening. Our techs carry ignitors, flame sensors, gas valves, and control boards on the truck, so we can typically finish the repair in one visit. We’ll also check your thermostat’s wiring and calibration, because older Ontario ranch homes often run original low-voltage wiring that’s overdue for a refresh. Call (707) 340-6380 and a live person answers, no matter the hour.

Trusted Brands We Service in Ontario
Our technicians are factory-trained to service nine major furnace brands, including Lennox, Goodman, Rheem, and York, so we repair what’s actually in your Ontario home rather than pushing a replacement you don’t need. Because we dispatch locally from the Inland Empire, we keep common parts for these brands in stock and ready to load. On a cold Monday in Ontario, that’s the difference between a same-day repair and waiting on a part shipment. We’ll tell you if your furnace still has life in it, and we’ll only recommend replacement when the math makes sense.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Ontario Homes
- Dust-choked blower motors and wheels near the 10/15 interchange. The constant truck and rail traffic kicks up fine particulate that coats blower wheels, raising static pressure and causing the motor to overheat. This is the single most common furnace failure we see in Ontario’s north side.
- Short-cycling from undersized 1950s-70s ductwork. Many Ontario ranch homes still run original ductwork sized for a less demanding era. Multi-zone and higher-efficiency furnaces often can’t move enough air, so the limit switch trips and the system cycles on and off without ever satisfying the thermostat.
- Cracked heat exchangers in aging single-stage furnaces. Ontario’s dust accelerates corrosion on heat exchanger surfaces, especially in furnaces that haven’t had regular tune-ups. A cracked exchanger is a safety issue and needs immediate attention.
- Failed ignitors and dirty flame sensors in high-dust zones. Homes near the Ontario Airport and major truck routes build up dust on sensors faster than elsewhere in the Inland Empire. A dirty flame sensor tells the furnace there’s no flame, so it shuts off as a safety measure.
Pricing for Furnace Repair in Ontario, CA
Furnace repair in Ontario runs $150 – $700 for most residential jobs. A furnace tune-up is $80 – $200. Here’s what that looks like line by line:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
What moves the price inside that range is the part that failed and how long it takes to access. An ignitor replacement in a newer closet-installed furnace is quick and affordable. A heat exchanger replacement in a 1960s furnace squeezed into a crawlspace access is a longer job. Either way, you’ll get a written price before we turn a screw. Estimates are free, and there’s no pressure to approve anything you’re not comfortable with. Call (707) 340-6380 for an exact quote.
We were called to a 1960s ranch near the intersection of the 10 and 15 freeways because the furnace was short-cycling and the blower motor was whining. Our tech found the blower wheel so caked with fine freeway dust that the static pressure was triple the design spec. We pulled the wheel, deep-cleaned the evaporator coil, and reset the thermostat calibration to match the home’s original single-stage controls. Now the system runs quietly and holds temperature without overheating. That’s the kind of repair Ontario homes need, and it’s what we’re built to deliver.
We Also Serve Cities Near Ontario
Beyond Furnace Repair in Ontario, we dispatch the same background-checked crews to Upland, Rancho Cucamonga, Chino Hills, and Chino. If your furnace is struggling anywhere in the west Inland Empire, call (707) 340-6380 and we’ll tell you straight whether we can be there today.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Ontario
The warehouses themselves aren’t the problem, but the truck and rail traffic serving them kicks up fine dust that settles on your blower wheel and motor bearings. In Ontario’s north side near the 10/15 interchange, that dust builds up fast enough to unbalance the wheel and strain the motor, causing the whine and early failure. Regular cleaning of the blower assembly extends motor life significantly here. Call (707) 340-6380 to schedule a tune-up that includes blower cleaning.
Your technician should measure static pressure before quoting any new furnace. If your 1960s ranch home in Ontario still runs original undersized ducts, the static pressure will be high, and a new high-efficiency furnace will short-cycle just like the old one. Ductwork retrofit is a bigger conversation, but knowing the numbers first means you won’t buy a furnace that can’t breathe. We measure static pressure on every tune-up and repair visit, then show you the reading.
A heat exchanger inspection is a visual check for cracks, rust, or burn-through in the metal chamber that separates combustion gases from your home’s breathing air. In Ontario, fine dust from freeway and rail corridors accelerates corrosion on heat exchanger surfaces, especially in furnaces that haven’t been tuned up regularly. A cracked heat exchanger can leak carbon monoxide, so this inspection is a safety check, not a formality. Call (707) 340-6380 to schedule one before winter.
In many cases, yes. You can add zone dampers and a zone control panel to an existing furnace, letting you set different temperatures for different areas of your Ontario home. The bigger question is whether your ductwork can handle zoned airflow. Many 1950s-70s Ontario homes have ducts too small for zoning without modifications. We’ll inspect and measure before recommending anything, so you know what’s actually feasible in your house.
Short-cycling in winter with a fine AC in summer usually points to reduced airflow across the heat exchanger, not a cooling problem. Dust from the airport area and nearby highways coats the blower wheel and heat exchanger surfaces, raising static pressure until the furnace’s limit switch trips. Cleaning the blower assembly and verifying airflow often solves it without replacing any parts. Call us and we’ll check the airflow numbers before recommending a fix.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Riverside, serving Ontario since 2004.