Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Perris
AC installation in Perris typically runs $3,500 – $7,500 for a complete central air system, and most jobs are scheduled within a few days of the estimate. We work in Perris year-round, but the real pressure comes June through September, when outdoor temperatures push past 100°F and indoor comfort stops being negotiable. If your existing unit is struggling or dead, call (707) 340-6380 for a free estimate. We’ll get a live person on the line, not a voicemail queue.
Meadowsweet Heating and Air Riverside knows Perris’s particular cooling problem better than most: afternoons where the attic hits 140°F and a marginal system simply stops. Choosing the right equipment for this valley isn’t about brand loyalty. It’s about honest load sizing, clean ducts, and an electrical panel that can carry the load when the whole neighborhood is pulling peak power. That’s the work we do, and we do it carefully.
Key Takeaways
- Central AC installation in Perris costs $3,500 – $7,500, with the final number set by home size, duct condition, and efficiency level.
- Newer Perris homes often have contractor-grade systems sized just barely to code; a like-for-like swap can repeat the same compressor failure by August.
- Older Perris homes from the 1950s – 70s usually need duct sealing or replacement and possibly a panel upgrade before a modern system performs as rated.
- Every job includes a written price before work starts, shoe covers and drop cloths, and a photo of the clean-up before our crew leaves.
- Our 365-Day Done Right Promise means if it isn’t right, we make it right. No runarounds.
Styles & brands we work with
Why Meadowsweet Heating and Air Riverside Is Perris’s Preferred AC Installation Company
Perris homeowners ask us for two things: a system that survives the summer and a crew that treats the house like a home. We deliver both. Our technicians are background-checked and uniformed, and they follow a set of rules we call the C.A.R.E. values: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. That’s not a slogan. It’s a checklist, followed on every visit.
We’re part of the Cedarwell family of HVAC companies, founded in 2004. That gives us access to training, parts, and equipment support across nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. But the reason Perris calls us repeatedly is simpler: we show up when we say we will, we tell you the price in writing before anything starts, and we leave the house clean enough that you wouldn’t know a crew was there, except the air is finally cold.
Luis Serrano leads our team, and he holds the standard that every Perris job, whether it’s a central air install near Lake Perris or a heat pump replacement off Nuevo Road, gets the same care. A live person answers every call, 24 hours a day, seven days a week. If your AC dies on a Saturday night in July, you’ll talk to a human, not a recording.
Central Air Conditioning Installation in Perris
Central Air Conditioning Installation in Perris isn’t a single-size job, and the homes here prove it. A 1958 ranch near downtown Perris and a 2007 stucco two-story near the 215 both need cold air, but they need very different equipment and probably different duct work. Most central installs in Perris fall between $3,500 and $7,500, depending on home size, existing ductwork, and the SEER2 rating you choose. The mistake we see most often in this valley is copying the old unit’s tonnage without running a load calculation. In a Perris summer, that shortcut catches up quickly.
We start with a room-by-room Manual J load calculation, not a guess. That tells us exactly how many tons your home needs on a 100°F design day, and it often differs from whatever was originally installed. From there, we size the condenser, match the air handler, and verify the duct work can actually carry the air the system produces. If it can’t, we tell you before the install, not after the first electric bill.
Permit Handling and Code Compliance
Perris, like the rest of Riverside County, requires mechanical permits for new AC installations. We handle the paperwork. Our crews are trained on current Title 24 standards, and we make sure the final install passes inspection before we call the job done.
What a Full Replacement Involves
A full central air replacement includes removing the old condenser and coil, installing the new outdoor unit, flushing the refrigerant lines, and verifying the blower and controls. We also check the condensate line and safety switches. Before we leave, we run the system and measure supply and return air temperatures so you know it’s producing real cooling from day one.
Furnace Installation in Perris
Furnace Installation in Perris gets less attention than AC work, but the same attics that bake your cooling system in July get surprisingly cold on January mornings. A furnace installation in Perris runs $150 – $700 for the labor portion of a like-for-like swap, though full furnace replacements with new ducting or larger capacity will push higher and are typically priced as part of a complete system quote. If you’re pairing a new furnace with a new AC, it’s usually the most economical time to do both, since the crew is already cutting into the same plenum.
Most Perris homes have gas furnaces in the attic or a hallway closet, and the older ones haven’t been inspected in years. A cracked heat exchanger or rusted flue is a safety issue, not a comfort one. We check combustion air, venting, and gas pressure as part of every furnace install, and we’ll tell you honestly if the old furnace still has life in it or if replacement is the smarter path.
When to Pair a Furnace with AC
If your AC is being replaced and the furnace is more than 15 years old, pairing them often saves money long-term. You’re already paying for the crane or attic access, the permit, and the crew. Doing both at once keeps the system matched and avoids a second permit and a second round of drywall cuts later.
Furnace Options for Perris Homes
We install 80% and 90%+ AFUE gas furnaces, sized to your home’s duct work and blower capacity. In older Perris homes with low airflow, a two-stage furnace often makes more sense than a single-stage, because it runs longer at lower heat and doesn’t fight the ducts on every cycle.
Trusted Brands We Service in Perris
We service and install nine major equipment brands, and for Perris we typically recommend Trane, Lennox, Goodman, and Rheem depending on the home’s budget and the load calculation. Trane and Lennox suit homeowners who want high efficiency and quiet operation. Goodman and Rheem offer strong value at a lower upfront cost. We stock common parts for all of these locally, which means faster turnaround when a Perris customer needs a capacitor or contactor mid-summer. You get a written price before any work starts, and the equipment choice is yours, with our honest read on what makes sense for the house.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Perris Homes
- Like-for-like tonnage swaps on 2000s production homes. Many Perris houses built since the early 2000s were sized just enough to pass Title 24. Copying the old 2-ton unit without a load calculation means the new system still short-cycles and eats compressor windings by August. A real calculation is the only fix.
- New high-efficiency units on original 1950s – 70s ductwork. Leaky, uninsulated ducts in a 140°F attic bleed capacity and can pull a new system below its rated SEER2 before the first bill even arrives. The efficiency on the sticker only matters if the ducts can carry the air.
- Panel and breaker checks skipped entirely. Older Perris homes often have 100-amp panels with no open slots for a heat pump or larger condenser. A rushed crew will leave the new unit tripping the breaker on the hottest afternoons, and the homeowner will think the AC is defective. It isn’t. It’s unpowered.
- Condo and townhome access constraints near downtown Perris. Tight side yards, HOA rules, and rooftop package units change how the job must be sequenced. We coordinate with the HOA when needed and keep the path to the unit clean so nothing gets damaged getting equipment to the pad.
Pricing for AC Installation in Perris, CA
| Service | Typical Price Range in Perris |
|---|---|
| Central Air Conditioning Installation | $3,500 – $7,500 |
| Furnace Installation | $150 – $700 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
The spread between $3,500 and $7,500 comes down to three things: home size, duct condition, and efficiency level. A 1,200-square-foot home with decent ducts and a 14 SEER2 system will land near the low end. A 2,600-square-foot two-story with original ducting and a 17+ SEER2 heat pump will land near the top. Every quote includes a written price before any work starts, and there’s no obligation. Call (707) 340-6380 for a free estimate, and we’ll give you a hard number you can plan around.
We Also Serve Cities Near Perris
Our crews work throughout the Inland Empire, not just inside Perris city limits. We regularly install and service systems in Perris and the surrounding communities, including Moreno Valley, Lake Elsinore, Menifee, and Riverside. If you’re in one of those areas and need a real load calculation instead of a guess, our AC Installation team is ready to help. Same written pricing, same 365-Day Done Right Promise, same spotless clean-up.
Serving Perris, CA - Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Perris
A like-for-like swap disappoints in older Perris homes because the original system was rarely sized correctly for today’s heat, and the ductwork has been leaking capacity into a 140°F attic for decades. New equipment can’t fix bad ducts or an undersized blower. If you copy the old tonnage without a load calculation, the new unit will work as hard as the old one did, and you’ll pay the same electric bill with the same warm rooms. The right fix is a room-by-room calculation and, usually, air sealing on the ducts. Call (707) 340-6380 for a free load assessment.
It depends on your panel’s amperage and available breaker slots. Many older Perris homes have 100-amp panels that are already near capacity with a dryer, range, and pool pump. Adding a heat pump or high-efficiency condenser can require a subpanel or full upgrade. We check the panel as part of every estimate and tell you before the install whether the new system needs more power. No surprises, because the price is written down before work starts.
For a 2005-era system with a failed compressor, full replacement is usually the better path in Perris’s climate. The compressor is the heart of the system, and replacing it alone on an R-22 unit with worn coils and a tired blower often costs more per year of life than a new, more efficient system. We replaced a failed 2-ton Goodman in a 2005 stucco home off Nuevo Road late last summer; the load calculation showed the house actually needed 3 tons, and the new 14.3 SEER2 Trane unit dropped static pressure and held a steady 55°F supply air across all three bedrooms. That’s the difference between a patch and a fix.
SEER2 is the newer testing standard that better reflects real-world conditions, including higher static pressure and realistic duct work. It’s a more honest number. A unit rated 16 SEER under the old standard might be 15.2 SEER2 under the new one, not because it got worse, but because the test got harder. What matters more in Perris is whether your ducts and panel let the system actually achieve its rated efficiency. A 17 SEER2 unit on leaking 1960s ductwork won’t cool like the sticker promises.
Newer Perris homes often have contractor-grade systems sized marginally to meet Title 24 efficiency minimums, which means they run at maximum load through the entire summer. Operating continuously from June through September accelerates wear on capacitors, contactors, and compressor windings. Add a dirty condenser coil from Santa Ana dust and a 140°F attic, and thermal lockout or compressor failure in under a decade is common. A proper load calculation and clean install can stretch that lifespan meaningfully. Call (707) 340-6380 and we’ll tell you what your home actually needs.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Riverside, serving Perris since 2004.